5 Sets 433 MHz Transmitter and Receiver Module Kit for Remote Control Raspberry Pi Arduino/Burglar Alarm

$7.40
Availability: In stock
SKU
053
  • Buy 20 for $6.50 each and save 12%
  • Buy 100 for $5.50 each and save 26%
 
  • UNIVERSAL: The kwmobile 433 MHz wireless module is usable for a variety of wireless remote control mechanisms; GPS, and other projects. Furthermore you can use it with a external antenna (not included).
  • EXAMPLE OF USE: This module is versatile - e.g. wireless outlets, alarm systems, lights and else. Let your creativity run free.
  • PLEASE NOTE: To enlarge the reception range, you should solder or plug a copper wire to the XY-FST of the ANT contact point.
  • COMPATIBILITY: Compatible with Raspberry Pi and Arduino devices.
  • TECHNICAL SPECIFICATIONS: Transmitter: MX-FS-03V / Receiver: MX-05V; Range: 20 - 200m; Operating mode: AM / Sensitivity: -105dB

UNIVERSAL USE

  • The kwmobile 433 MHz wireless transceiver is usable for a variety of wireless remote control mechanisms and projects

EXAMPLES

  • This module is versatile - e.g. wireless outlets, alarm systems, lights and else. Let your creativity run free

NOTE

  • The reception range depends on the environment used in as well as power supply support. To increase reception range, an antenna can be soldered to it

SPECIFICATIONS

  • Transmitter: MX-FS-03V / receiver: MX-05V
  • Voltage Supply: Transmitter: 3.5 - 12V DC / Receiver: 5V DC
  • Range: 20 - 200m (depending on the voltage supply)
  • Operating Mode: AM / Sensitivity: -105dB
  • Transmitting Power: 10mW / Transmitting and Receiving Frequency: 433Mhz
  • Transfer Rate: 4 KB / S / Bias Current: 4 mA
  • Dimensions: Transmitter: 19 x 19mm / Receiver: 30 x 14mm / Pin Configuration: Data, VCC, Mass (from left to right)

SCOPE OF DELIVERY

  • 5x 433 MHz Transmitter Receiver
Write Your Own Review
You're reviewing:5 Sets 433 MHz Transmitter and Receiver Module Kit for Remote Control Raspberry Pi Arduino/Burglar Alarm